Products

A 10 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

An 11 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

A 12 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

A 13 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

A 14 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

A 16 tooth aluminum timing pulley designed to easily interface with the Falcon 500's spline shaft. Learn More

An 8 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

A 9 tooth steel gear with a diametrical pitch of 20, designed to interface with the Falcon 500's spline shaft. Learn More

Anderson Powerpole Contact PP45 #10-14 AWG. Housings sold separately. Learn More

Anderson Powerpole Contact PP30 #12-16 AWG. Housings sold separately. Learn More

Anderson Powerpole Contact PP15 #16-20 AWG. Housings sold separately. Learn More

This is a ratcheting crimping tool for Anderson Powerpole Contacts - 15 A (1332), 30 A (1331), and the 45 A (261G2). Learn More

Anderson Powerpole Housing PP15/45 - BLACK. Contacts sold separately. Learn More

Anderson Powerpole Housing PP15/45 - GREEN. Contacts sold separately. Learn More

Anderson Powerpole Housing PP15/45 - RED. Contacts sold separately. Learn More

Anderson Powerpole Housing PP15/45 - WHITE. Contacts sold separately. Learn More

Anderson Powerpole Housing PP15/45 - YELLOW. Contacts sold separately. Learn More

The Battery Beak is a battery load tester capable of delivering an 18 amp load and measuring a batteries internal resistance, state of charge (SOC), and determines the overall health of a battery. Learn More

This is a Tamiya to Anderson SP-50A power cable. Use this connector with the Battery Beak when needing to check and test batteries for the VEX Robotics and FTC competitions. Learn More

FRC READY Battery Cable made with INFINITIFLEX 6 AWG wire - extremely DURABLE while also being extremely FLEXIBLE. Learn More

This is a twisted pair of 22 AWG yellow & green wire. This cable is designed to be used as a CAN Bus cable. Learn More

The CAN Connector makes joining together two CAN devices easy. Learn More

The CANcoder is the next evolution in the line of CTRE magnetic encoder products.

Learn More

The CANifier is a CANbus-to-IO converter with a powerful 10-amp RGB LED strip driver. Features include PWM inputs and outputs, Quadrature decoding, GPIO, and a field-upgradeable firmware system. Learn More

A simple cable extender module. Connect two data cables (PN 14-886867) together for increased length for either the TalonSRX or the Hero Development Board. Learn More

This kit should be used as an upgrade kit for Falcon 500's purchased before December 2020. It can be used for replacement hardware for Falcon's purchased after December 2020. Learn More

The Falcon 500, powered by Talon FX, is a brushless motor with an integrated controller co-developed through a collaborative partnership between VEX Robotics and Cross the Road Electronics. Learn More

Replaceable shafts for the Falcon 500 motor. Use these to replace shafts that have been cut, bent or damaged. Learn More

Replaceable shafts for the Falcon 500 motor. Use these to replace shafts that have been cut, bent or damaged. Learn More

Additional spacers to help position items on the Falcon 500 Motor's shaft. Learn More

ThunderHex adapter for Falcon 500 spline shaft Learn More

Self-adjustable crimping tool used for 23 AWG - 10 AWG wire & cable end-sleeve ferrules. Learn More

This module breaks-out the gadgeteer socket pins on a 0.1" header placement Learn More

The .NET Gadgeteer 1.8" 128x160 Color LCD Display with controllable backlight & a 4" gadgeteer data cable. Learn More

The Gadgeteer Driver Module provides six low-side outputs, expanding HERO's capability to control high-current loads such as solenoids, motors (on/off), LED strips, and more. Learn More

Pigeon is an IMU with 9 degrees of freedom, containing a 3-axis magnetometer, accelerometer, and gyro. This device ships with a 4" gadgeteer data cable. Learn More

The .NET Gadgeteer WiFi Module based on the ESP8266 WiFi module. This device ships with a 2" gadgeteer data cable. Learn More

A user programmable hardware platform that runs the .NET Micro Framework, users may develop applications using Visual Studio written in C#

Be sure to purchase a USB A-to-A cable to leverage all features.

Learn More

1 Meter USB 2.0 Type A Male to Type A Male Cable - Black Learn More

1 Meter USB 2.0 Type A Male to Mini Type B Male Cable - White Learn More

The Hex Bore Mag Encoder Housing allows users to mount any SRX Mag Encoder or CAN Mag Encoder directly to a 1/2" Hex Shaft, no modifications required. Learn More

The interstate SLA1116 battery has a low internal resistance and an 18 amp hour capacity making it the preferred of choice for FRC teams. Price is for 2 batteries.

This product does NOT qualify for free or international shipping.

Learn More

A 4-pin JST cable interfaces with the Talon FX to connect forward and reverse limit switches signals to the controller. Learn More

The Pneumatic Control Module provides an easy all-in-one interface for pneumatic components. Learn More

The Power Distribution Breakout PCB is a perfect and inexpensive solution for distributing power to subsystems in an overall control system design. Learn More

The Power Distribution Panel (PDP) is the latest DC power interface for competition robotics. The PDP uses CAN to connect directly to the roboRIO and allows for individual current monitoring on each channel.

 

Learn More

20 Amp Snap Action Breaker used in the Power Distribution Panel Learn More

30 Amp Snap Action Breaker used in the Power Distribution Panel Learn More

40 Amp Snap Action Breaker used in the Power Distribution Panel Learn More

This spare kit includes the Battery Cover, screws, washers, and ATM Blade Mini Fuses used by the Power Distribution Panel.

Learn More

WAGO Operating Tool for easily opening the red and black WAGO connectors on the PDP. Learn More

This is black flexible 12 AWG stranded wire utilizing a silicone based insulation making it ideally suited for power distribution in a robot. Comes in a twist-tied roll of 25 feet of wire. Learn More

This is green flexible 12 AWG stranded wire utilizing a silicone based insulation making it ideally suited for power distribution in a robot. Learn More

This is red flexible 12 AWG stranded wire utilizing a silicone based insulation making it ideally suited for power distribution in a robot. Comes in a twist-tied roll of 25 feet of wire. Learn More

This is white flexible 12 AWG stranded wire utilizing a silicone based insulation making it ideally suited for power distribution in a robot. Comes in a twist-tied roll of 25 feet of wire. Learn More

This 12" long cable contains female 2x5 pin data connections on either end to help facilitate Talon SRX external inputs. Learn More

This kit includes a 10' long data cable and 20 female 2x5 pin data connectors for making custom length SRX/Gadgeteer Data Cables. Learn More

The SRX Mag Encoder is a rotary sensor that can be used to measure rotational position and velocity.

Learn More

The SRX Encoder Hardware Kit contains all the replacement parts you need to reuse the magnetic encoder in alternate applications.

Learn More

The Talon SRX offers the latest in smart speed control technology compressed into a robust, compact package. This latest iteration of the popular Talon platform by CTR Electronics adds support for CAN, additional communication protocols, and integrated PID control. Learn More

This breakout board makes wiring 5V analog sensors to the Talon SRX quick and easy. Learn More

This breakout board makes wiring a quadrature encoder or a limit switch to the Talon SRX quick and easy. Learn More

The Talon Tach is a pass through contactless limit switch and tachometer that integrates seamlessly with the Talon SRX motor speed controller. Learn More

This is a twisted pair of 22 AWG red & black wire. This cable is designed to be used for powering low-current devices. Learn More

The Victor SPX is the latest member of the Victor Motor Controller product line. This latest iteration is 10% smaller and 25% lighter than the Victor SP, making it the smallest and lightest motor controller in FIRST Robotics Competition history. Learn More

The Voltage Regulator Module provides access to different constant voltages for custom sensors, cameras, or other unique applications. Learn More

The VersaPlanetary Motor Coupler is designed to couple Falcon 500 Motors with the VersaPlanetary.

Learn More

We only sell Weidmuller brand ferrules made by the same company that makes the Weidmuller connectors used on the PDP, PCM, and VRM. Package of 20 Ferrules. Learn More

We only sell Weidmuller brand ferrules made by the same company that makes the Weidmuller connectors used on the PDP, PCM, and VRM. Package of 20 Ferrules Learn More