Falcon 500 Hardware Kit

P/N: 21-707275

This kit contains all the hardware needed to upgrade Falcon 500's that were purchased for the 2020 season.

This hardware is used to:

• Make re-assembly easier by changing the long screws holding the motor chamber from steel to stainless
• Replace the #10-32 set screw on the cooling port with a #10-32 button head screw
• Change the M2.5 screws that attach the shaft to the motor from 2mm hex drive to T8 drive
• Make all screws more difficult to strip by changing them to harder materials

Kit Contents:

• (1) #10-32 x 0.188" Button Head Cap Screw, Grade 8 Steel, Black Zinc
• (3) 8mm ID x 11mm OD x 0.8mm Thick Washers
• (3) M3 x 50mm Torx Button Head Screws
• (6) M2.5 x 6mm Socket Head Cap Screws